HFLD11435E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
1 x 14,21,28 & 35W T5 |
| Mains Input Range: |
220-240V, 50/60 Hz |
| Current: |
0.16 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40KHz |
| Pre-Heat: |
<1 second |
| Power Factor: |
>= 0.98 |
| Temperature Range: |
0 °C to 60 °C / tc: 75 °C
(Check operational parameters of the lamp at low temperatures).
|
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powder Coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 metre
- The lamp MUST be run at full output for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1,in a properly ventilated fitting and used in a controlled environment with an ambient temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
 |
 |
HFLD21435E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
2 x 14,21,28 & 35W T5 |
| Mains Input Range: |
220-240V, 50/60 Hz |
| Current: |
0.32 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40 KHz |
| Pre-Heat: |
<1 second |
| Power Factor: |
>= 0.98 |
| Temperature Range: |
0 to 60 °C / tc: 75 °C
(Check operational parameters of the lamp at low tempeartures). |
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powder Coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 metre
- The lamps MUST be run at full output for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1,in a properly ventilated fitting and used in a controlled environment with an ambient temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
|
|
HFLD11840E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
1 x 18, 25, 30 & 36W T8
1 x 24 & 39W T5
1 x 18, 24, & 36W TC-L/TC-F
1 x 40W TC-L |
| Mains Input Range: |
220-240V, 50/60 Hz |
| Current: |
0.18 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40 KHz |
| Pre-Heat: |
<1 second |
| Power Factor: |
>= 0.98 |
| Temperature Range: |
0 °C to 60 °C / Tc: 75°C
(Check operational parameters of the lamp at low tempeartures). |
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powder coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 Metre
- The lamp MUST be run at full output for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1, in a properly ventilated fitting and used in a controlled environment with an ambient temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
|
|
HFLD21840E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
2 x 18, 30 & 36W T8
2 x 24 & 39W T5
2 x 18, 24, 36 & 40W TC-L
2 x 18, 24 & 36W TC-F |
| Mains Input Range: |
220-240V, 50/60Hz |
| Current: |
0.36 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40 kHz |
| Pre-Heat: |
<1 second |
| Power Factor: |
>=0.98 |
| Temperature Range: |
0 °C to 60 °C / Tc: 75 °C
(Check operational parameters of the lamp at the low temperatures). |
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powdered Coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 metre
- The lamp MUST be run at full output for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1,in a properly ventilated fitting and used in a controlled environment with an ambient temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
|
|
HFLD15458E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
1 x 58W T8
1 x 54W T5
1 x 55W TC-L |
| Mains Input Range: |
220-240V, 50/60Hz |
| Current: |
0.26 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40 kHz |
| Pre-Heat: |
< 1 second |
| Power Factor: |
>= 0.98 |
| Temperature Range: |
0 °C to 60 °C / Tc: 75 °C
(Check operational parameters of the lamp at low temperatures).
|
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powdered Coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 metre
- The lamp MUST be run for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1,in a properly ventilated fitting and used in a controlled environment with an ambient temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
|
|
HFLD25458E
Long Life 1-10V Dimmable HF Ballasts
|
|
| Lamp Type: |
2 x 58W T8
2 x 54W T5
2 x 55W TC-L |
| Mains Input Range: |
220-240V, 50/60Hz |
| Current: |
0.52 Amp max |
| Dimming Range: |
1% - 100% |
| Operating Frequency: |
40 kHz |
| Pre-Heat: |
< 1 second |
| Power Factor: |
>= 0.98 |
| Temperature Range: |
0 °C to 60 °C / tc: 75 °C
(Check operational parameters of the lamp at low temperatures).
|
| Measurements: |
360 x 30 x 26 mm |
| Fixing Point: |
350-360 mm |
| Approvals: |
CE, ENEC & KEMA |
| Weight: |
360 grams |
| Case Material: |
Powder Coated Steel |
|
|
- No electrolytic capacitor for longer life expectancy
- Push wire connectors 0.5mm² to 1.5mm²
- Internal Protection against lamp failure and short circuit.
- Maximum Lamp Lead Length: 1 metre
- The lamps MUST be run for a min of 100 hours prior to dimming.
- * The 80,000 hour (M.T.B.F) is conditional on the ballast being fitted correctly and in accordance with the luminaries standard BS EN 60598-1,in a properly ventilated fitting and used in a controlled environment with an ambinet temperature of 50°C maximum.
Unit 1 Highpoint Business Village - Henwood Industrial Estate -
Ashford Kent - TN24 8DH
Tel: 01233 668 041 - Fax: 01233 668 042 - efasales@arlen.co.uk
|
|
|
|